Bone Inlay 1 Drawer 2 Door Bedside Honeycomb Design Sky Blue

The Solid Wood lumber [Mango, Sheesham or Teak] needs to be procured at an optimum level of dryness to avoid infestation. All raw materials are sourced by manufacturers from the pre-approved suppliers only to ensure standardisation and best quality.

The rough lumber is then sliced into selected length to match the furniture specifications. These panels are then glued and are placed into a pneumatic clamp carrier where constant and even pressure insures only the best joints.

After designated drying times, sanding is performed. Sanding helps eliminate any scratches, cuts, or flaws in the wood. Sanding is also needed in order to ensure that a wood stain soaks in to the wood surface properly. After sanding the wood is stained using solvent based strainers as per the colour selected.

Each piece of furniture is then quality checked for dimensions, design accuracy, finish quality, raw materials used and exactness of the wood colour at the manufacturers location.

Each piece of furniture is packed with four layers of packaging – bubble wraps, corrugated roles, outer cartons and shrink films. All corners are additionally covered with protectors and void spaces are filled using filling material to ensure minimal transit damage.

All furniture items are shipped using dedicated trucks to the Pepperfry distribution centres. The products are then further delivered at customer’s door step using our own last-mile-delivery infrastructure. Assembly and Carpenter services are provided free of cost to all customers.